Plumbing Products
These cameras include the Intruder series and have a mini or standard size.
Proprietary Products for Drain Inspection and Leak Detection
The Intruder Standard
Features
Model Specifications
- Line Capacity: 3″ to 12″ (7cm to 30cm)
- Cable Length 200′ up to 300′
- Operating Depth 350 ft. (150psi)
- Resolution 420 TVL Pixels
- 512(H) x 492(V) [PAL 512(H) x 585(V)]
- Sensitivity 0.3 Lux
- Lighting 28 White LED’s
- Camera Dimensions: 1.6″ x 1.4″ (41mm x 36mm)
- Push-Rod Diameter: .48″ (12mm)
- Video Format: NTSC
- Power: 110v/60hz AC, 12v DC
- Operating Temperature: 14F to 122F/-10C to 50C


Standard Camera
Intruder Standard Series
Standard Equipment
- Rugged & Durable and Professionally Packaged
- Standard Camera
- 200′ Push Cable OR 300′ Push Cable
- 7″ LCD Command Module
- Text Writer, Footage Counter, Picture Inverter
- Light Adjustment, Time/Date
- AC/DC Operation
- 512 Hz Built in Transmitter
Available Options
- Built In USB Recorder
- Phone Playback Adapter
- Self Leveling Camera Head
- 18 volt battery receptacle (Battery and Charger not included)
- WIFI to phone or Tablet
- Camera Locator Receiver
Option
USB for Recording
Built-in USB recording: can be added to any camera system.

Optional
ST-SLM-2040 Self Leveling Camera

For smaller pipes
Intruder Mini Series
Standard Equipment
- Professionally Packaged
- Rugged & Durable
- Mini Color Camera
- 7” LCD Command Module
- Light Adjustment, Time/Date
- Microphone
- 512 Hz Built in Transmitter
- Text Writer, Footage Counter, Picture Inverter
- 18 Volt Battery Receptacle (Battery and Charger not included)
- 140′ Pushrod OR 200′ Pushrod
Available Options
- Phone Playback Adapter
- WIFI to phone or Tablet
- Camera Locator Receiver
- Built In USB Recorder
- Self Leveling Camera Head
Leak Detector
ST-2000 Water Leak Detector
Municipalities & Utilities
Locate leaks on water mains, fire main systems and monitor for future potential water loss.
Plumbers
Locate water leaks under concrete slabs, in walls, swimming pools or hot tubs.
Contractors
Locate leaks on new pipeline, pressure failures, residential and commercial water lines.
Features
ST-2000 Specifications
- Amplifier Input Impedance: 200K
- Output Impedance: 10 OHM
- Power: 6 AA Alkaline Batteries (1.5 V DC x 6)
- Power Consumption: 60mA Standby (20 hours)
- Amplification: 69 dB=/-3.5 dB Distortion: 6.0″ x 2.4″ x 5.0″
- Weight: 41.0 Ounces
- General Ground Microphone Sensitivity: 0.75 V/G @ 1 KHz
- Probe Microphone Sensitivity: 0.75 V/G @ 1 KHz
- Headphone Impedance: 32 OHM
- Headphone Sensitivity: 102 dB/mW @ 1KHz
- Carry Case: High Density Polyethylene 20.” X 13.5″ x 9.0″
- Filter Characteristics:
- 16 Programmable Settings
- 8th order/ -60 dB Fstop Max
- 0.025 dB Max ripple
- 70 Hz 500 Hz Bandpass
Option
Vloc 3 Locator
- No ghost signals
- Graphical locate display
- Sonde locate and pushrod trace modes
- Optional Bluetooth option for GPS mapping
- High visibility color 4.3″/10cm Display
Option
Locator VM-540
- Push button depth
- Operates in 50/60Hz, 512Hz, 640Hz, 33kHz frequencies
- Digital display – Depth, Signal Level, Battery Condition
- Audible tone indicating signal strength
- Simple keypad
- High impact thermoplastic (ABS) injection molded housing
- Carbon fiber reinforced antenna tube
- High rejection of power source interference
- Superior sensitivity over wide temperature range
- Weather resistant – IP54 and NEMA 4 rated
- Enhanced ergonomic design
- 20-Hour Battery Life


Contact Information
Subtech Design & Manufacturing Inc.
2905 Railroad Ave Suite A
Ceres, CA 95307
Phone: (209)531-9716
Send us a message